Rural Vacant LandZoning Library
Zoning Library › North Carolina › Wallace, NC

Wallace, NC zoning: where a drive-thru restaurant is allowed

Duplin County · 12 districts on file · last read 2026-11-21 · data.json

Is a drive-thru allowed in Wallace, NC?

A drive-thru restaurant is allowed by right (no conditional use permit, special exception or rezoning) in these zoning districts: CB, HB, NB.

It is not allowed in 8 districts: I, R-6, R-6MH, R-8, R-10, R-15, R-20MH, RA-20.

1 district is not confirmed yet.

Drive-thru rules in plain words

Table 5.1.1 lists restaurants (A, B, C) and a separate Drive-up Window use as permitted (P) in the CB, HB and NB districts, with no special use permit marked. Both are blank, and so prohibited under Section 5.1(A), in the residential districts and I. The Drive-up Window definition, the RSU district on the town map, and any drive-up standards could not be read.

Code facts

Jurisdiction
Town of Wallace, North Carolina
Zoning code
Town of Wallace zoning code (American Legal, wallace_nc_zoning)
Code last amended
American Legal shows version 2025 S-1, current through January 14, 2021
Restaurant parking
Not read.
Drive-thru stacking
Not read.
Signs
Not read.
Typical approval time
Not read.
Official code
codelibrary.amlegal.com
Official zoning map
wallacegis.maps.arcgis.com
Planning office
Planning & Community Development 910-285-4136 wallacenc.gov

Approvals and how long they take

ApprovalWho decidesStepsTypical timeFeeSection
Special Use PermitTown Council, after Technical Review Committee review and a Planning Board recommendation, at a quasi-judicial hearingApplication to Planning Director; TRC review; Planning Board recommendation (meets within 30 days of notice); quasi-judicial hearing with adjacent-owner notice at least 10 days before; Council findings; record the permit within 10 days; then construction drawing approval and a Zoning Compliance Permit (Sec. 3.13)Council cannot act until 30 days after the Planning Board is notified or it recommends, whichever is first; SUP expires after 24 months without a Zoning PermitNot read3.8 source

District standards

DistrictRestaurantSection
CBBy right5.1 source
HBBy right5.1 source
INot allowed5.1 source
NBBy right5.1 source

Overlays to watch

Second check against the source text: 2026-11-21 (Found the Town's own ArcGIS zoning layer (FeatureServer/7, field Zoning). Renamed R-6 MH and R-20 MH to the layer codes R-6MH and R-20MH. Added RSU (on layer, not in Table 5.1.1) as unclear / not read. Table 5.1.1 headers re-read on 0-0-0-18899. Chapter 4, Chapter 6 and Chapter 10 pages on American Legal still failed, so district names and the Drive-up Window definition are unread; CB/HB/NB stay by_right at medium confidence.).

Drive-thru restaurant rule by zoning district

DistrictDrive-thru restaurantWhat the code saysSectionSourceRead on
CBBy rightRestaurant A / Restaurant B / Restaurant C / Drive-up Window
Re-read Table 5.1.1: rows Restaurant A, B, C (IDs 2476-2478) and Drive-up Window (ID 2417) are each P in CB; no SUP or footnote on these rows. Sec. 5.1(A) says the table shows uses permitted by right, with a Special Use Permit, or as a combination use; the page does not define P. There is no separate "restaurant with drive-through" row; the drive-up window row is a separate use and its definition (Ch. 10) could not be opened, so it is assumed, not confirmed, to cover restaurant drive-throughs. No drive-up standards found in Ch. 5. A third pass still could not open the Ch. 10 definitions or Ch. 6 standards, so medium confidence stays.
5.1codelibrary.amlegal.com2026-11-21
HBBy rightRestaurant A / Restaurant B / Restaurant C / Drive-up Window
Re-read Table 5.1.1: rows Restaurant A, B, C (IDs 2476-2478) and Drive-up Window (ID 2417) are each P in HB; no SUP or footnote on these rows. Sec. 5.1(A) says the table shows uses permitted by right, with a Special Use Permit, or as a combination use; the page does not define P. There is no separate "restaurant with drive-through" row; the drive-up window row is a separate use and its definition (Ch. 10) could not be opened, so it is assumed, not confirmed, to cover restaurant drive-throughs. No drive-up standards found in Ch. 5. A third pass still could not open the Ch. 10 definitions or Ch. 6 standards, so medium confidence stays.
5.1codelibrary.amlegal.com2026-11-21
INot allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the I column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
NBBy rightRestaurant A / Restaurant B / Restaurant C / Drive-up Window
Re-read Table 5.1.1: rows Restaurant A, B, C (IDs 2476-2478) and Drive-up Window (ID 2417) are each P in NB; no SUP or footnote on these rows. Sec. 5.1(A) says the table shows uses permitted by right, with a Special Use Permit, or as a combination use; the page does not define P. There is no separate "restaurant with drive-through" row; the drive-up window row is a separate use and its definition (Ch. 10) could not be opened, so it is assumed, not confirmed, to cover restaurant drive-throughs. No drive-up standards found in Ch. 5. A third pass still could not open the Ch. 10 definitions or Ch. 6 standards, so medium confidence stays.
5.1codelibrary.amlegal.com2026-11-21
R-6Not allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-6 column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
R-6MHNot allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-6 MH column (layer code R-6MH), so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
R-8Not allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-8 column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
R-10Not allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-10 column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
R-15Not allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-15 column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
R-20MHNot allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the R-20 MH column (layer code R-20MH), so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
RA-20Not allowedUses not listed in the Table of Permitted Uses, Table 5.1.1, are prohibited.
Table 5.1.1 rows "Restaurant A", "Restaurant B", "Restaurant C" and "Drive-up Window" are blank in the RA-20 column, so the use is not listed and is prohibited.
5.1(A)codelibrary.amlegal.com2026-11-21
RSUNot confirmedNot read closely enough to state a rule.services1.arcgis.com2026-11-21

"By right" means permitted with site plan and building permit review only. Overlay districts, planned developments (PD/PUD) and conditions attached to a past rezoning can change the answer for a single parcel.

Official zoning map layer

To find the district for a parcel, query the jurisdiction's own GIS zoning layer: https://services1.arcgis.com/8dAtO3qhR0j8kvKI/arcgis/rest/services/Town_of_Wallace_GIS_2018_2_3/FeatureServer/7 (district field: Zoning)

Town of Wallace's own ArcGIS Online zoning layer (owner WallacePlanning2019, titled 'Wallace Zoning Districts' in the WallaceGIS web map). Distinct Zoning values: CB, HB, I, NB, R-10, R-15, R-20MH, R-6, R-6MH, R-8, RA-20, RSU (96 polygons; Zoning_Con and SUP fields are blank on every feature). The layer was last edited 2018-02-04, so later rezonings may be missing. An older 2015 'ZoningLayer' service from the same owner was not used. The same service has a Billboard Overlay District (layer 1) and a Historic District (layer 2); the web map calls them BDO and HDO. Layer codes R-6MH and R-20MH appear as 'R-6 MH' and 'R-20 MH' in the Table 5.1.1 column headers. RSU is on the layer but is not a Table 5.1.1 column, and its meaning was not read. The Duplin County server (gis.duplinnc.gov) has no Wallace zoning layer. District names, the districts-established section (Chapter 4) and the definitions (Chapter 10) on American Legal still returned client errors on a third pass, so district_name is blank. The small part of Wallace in Pender County was not checked.

Sources

How to confirm before you buy

  1. Look up the parcel on the official zoning map to get its district and any overlay.
  2. Open the code section linked in the table and read the use table and the drive-thru standards.
  3. Call the planning office and ask whether a drive-thru restaurant needs anything beyond site plan review at that address.

Why this library exists

I'm Luke Smith. I find land for drive-thru brands like 7 Brew, Ellianos Coffee and Starbucks, sign the tenant, build the shop and sell it as a net lease property. Every deal starts with the same question: is the use allowed here without a rezoning? Getting that answer takes too long, so we read the codes (with AI research help), and I publish what we find with a link back to every source so you can check it yourself.

If you have a site that fits a drive-thru, or you want to learn how these deals are put together, join the free Reverse Deal Finder community on Skool, see cap rates and land prices by brand, or call 1-760-392-1525. Brokers welcome: I pay commissions.