Rural Vacant LandZoning Library
Zoning Library › Arizona › Gilbert, AZ

Gilbert, AZ zoning: where a drive-thru restaurant is allowed

Maricopa County · 28 districts on file · last read 2026-11-16 · data.json

Is a drive-thru allowed in Gilbert, AZ?

A drive-thru restaurant is allowed by right (no conditional use permit, special exception or rezoning) in these zoning districts: CC, GC, NC, RC, SC.

It is not allowed in 13 districts: MF/H, MF/L, MF/M, NO, SF-6, SF-7, SF-8, SF-10, SF-15, SF-35, SF-43, SF-A, SF-D.

10 districts are not confirmed yet.

Drive-thru rules in plain words

Gilbert has no separate drive-through row in its use table. Restaurants are listed as permitted (with notes) in the commercial districts, and note L18 ('drive-through facilities prohibited') or L19 (only existing drive-throughs north of the Western Canal may continue) limits drive-throughs where cited, including Neighborhood Office and Heritage Village Center. Town staff confirmed in 2024 that a drive-through restaurant is permitted in Neighborhood Commercial, and drive-through design and stacking standards in LDC Sec. 5.3.13 apply wherever one is allowed.

Code facts

Jurisdiction
Town of Gilbert, Arizona
Zoning code
Land Development Code (LDC), Chapter I Zoning Regulations; Sec. 3.1 Use Regulations; Sec. 5.3.13 Drive-Through and Take-Out Facilities
Code last amended
Codified LDC adopted Sept. 21, 2021 (Ordinance 2809, effective Oct. 21, 2021); town page lists latest codified revision March 21, 2024 (Ordinance 2894). The Table 3.1.2 page footer reads Revised February 23, 2023. A later ordinance (No. 2906, July 2024, final plats) is listed as not codified; text amendment Z26-01 is pending and not treated as adopted.
Restaurant parking
LDC Sec. 5.3.6.B: limited-service and full-service restaurants 1 space per 100 sq ft, beverage-service 1 per 75 sq ft, plus 1 per 400 sq ft of outdoor dining. Reductions: up to 10 percent by Planning Manager approval, over 10 to 25 percent by Administrative Use Permit, over 25 to 50 percent by Conditional Use Permit (all with a parking study).
Drive-thru stacking
LDC Sec. 5.3.13: limited-service restaurant 4 stacking spaces (or 2 per lane for a double lane); beverage-service 3 per window. Spaces 12 ft by 25 ft, counted behind the order point. Aisles at least 12 ft wide, turning radius 15 ft inside and 30 ft outside, aisle screened from streets and homes, solid canopy over the pick-up window. The Zoning Administrator may move the order point or stacking locations but not cut the total.
Signs
Sign standards are in the LDC signs section, which was not in the part of the PDF read; drive-through menu boards were not found in Sec. 5.3.13 beyond canopy rules.
Typical approval time
Not stated in the code pages read; a Use Permit case needs public notice and a Planning Commission hearing.
Official code
gilbertaz.gov
Official zoning map
maps.gilbertaz.gov
Planning office
Town of Gilbert Development Services, Planning Division (480) 503-6700 gilbertaz.gov

Approvals and how long they take

ApprovalWho decidesStepsTypical timeFeeSection
Conditional Use Permit / Use Permit (code legend U)Planning Commission (UP23-47 staff report asks the Commission to approve after four findings)Application, newspaper, posted and neighbor notice under LDC Sec. 6.2.6, staff report, Planning Commission hearing; four findings: no detriment to health or safety, conforms to General Plan, meets code, no undue interference with neighbors.LDC Sec. 3.1.2 legend; Sec. 6.2.6 notice source
Administrative Use Permit (code legend A)Town staff (not confirmed in pages read)Used for parking reductions over 10 to 25 percent and deferred parkingLDC Sec. 3.1.2 legend; Sec. 5.3.4 source
Design Review (site plan, elevations, landscaping)Planning Commission acting as Design Review Board; some cases go on to Town CouncilStaff report then public hearing on site plan, landscaping, lighting, colors and materialsTown staff reports (DR23-86, DR23-170) source

District standards

DistrictNameMinimum lotSetbacksMax heightRestaurantSection
BPBusiness Parkfront 20-25, side 15-25, rear 15-25 ft (varies by street type and neighbor)35 ft / 2 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
CCCommunity Commercialmax building 50,000 sffront 20, side 15-30, rear 15-40 ft (varies by street type and neighbor)35 ft / 2 storiesBy rightLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
GBCGateway Business Centerfront 0, side 0, rear 0-20 ft (varies by street type and neighbor)90 ft / 6 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
GCGeneral Commercialfront 25, side 20-75, rear 20-75 ft (varies by street type and neighbor)45 ftBy rightLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
GIGeneral Industrialfront 30-35, side 20-100, rear 15-100 ft (varies by street type and neighbor)none statedNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
GOGeneral Officefront 25, side 15-30, rear 20-30 ft (varies by street type and neighbor)55 ft / 3 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
GVCGateway Village Centerfront 0, side 0, rear 0-20 ft (varies by street type and neighbor)90 ft / 6 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
HVCHeritage Village Center Districtfront 0, side 0-10, rear 0-20 ft (varies by street type and neighbor)55 ft / 4 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
LILight Industrialfront 25-30, side 15-75, rear 15-75 ft (varies by street type and neighbor)55 ft / 3 storiesNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
MF/HMulti Family/High DensityNot allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
MF/LMulti Family/Low DensityNot allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
MF/MMulti Family/Medium DensityNot allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
MU/LMixed-Use/Largemin site 5 acresfront 0 (arterial 20), side 0-10, rear 0-10 ft (varies by street type and neighbor)65 ftNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
MU/SMixed-Use/Smallmax site 10 acresfront 0 (arterial 20), side 0-10, rear 0-10 ft (varies by street type and neighbor)45 ftNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
NCNeighborhood Commercialnone; max building 25,000 sffront 20, side 10-15, rear 15 ft (varies by street type and neighbor)25 ft / 1 storyBy rightLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
NONeighborhood Officefront 20, side 10-20, rear 10-15 ft (varies by street type and neighbor)25 ft / 1 storyNot allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
PF/IPublic Facility/Institutionalfront 25, side 15-25, rear 15-20 ft (varies by street type and neighbor)55 ftNot confirmedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
RCRegional Commercialfront 25, side 20-75, rear 20-75 ft (varies by street type and neighbor)55 ftBy rightLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SCShopping Centermax building 75,000 sffront 25, side 15-75, rear 15-75 ft (varies by street type and neighbor)35 ft / 2 storiesBy rightLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-6Single Family Residential (6,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-7Single Family Residential (7,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-8Single Family Residential (8,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-10Single Family Residential (10,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-15Single Family Residential (15,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-35Single Family Residential (35,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-43Single Family Residential (43,000 sq.ft. per D.U.)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-ASingle Family Residential (Attached)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source
SF-DSingle Family Residential (Detached)Not allowedLDC Sec. 3.1 Table 3.1.2; district standards Sec. 3.4-3.10 source

Overlays to watch

Second check against the source text: 2026-11-16 (Second check re-read the town-hosted codified Land Development Code (Table 3.1.2 and notes L9, L10, L18, L19, L35, Sec. 5.3.13) and a 2024 Planning Commission staff report. Neighborhood Commercial is confirmed as permitted for a drive-through restaurant (the 2024 permit case came from older planned-development guidelines, not the base code). Community, Shopping Center, General and Regional Commercial are shown as permitted but the four columns cannot be separated in the printed table text, so confidence is medium. Neighborhood Office is prohibited per note L18. Heritage Village Center, General Office, Business Park, industrial, institutional, gateway and mixed-use districts remain unclear because table cells could not be matched to columns. Confirm with Planning before relying on any district. Not legal advice.).

Drive-thru restaurant rule by zoning district

DistrictDrive-thru restaurantWhat the code saysSectionSourceRead on
BP
Business Park
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
CC
Community Commercial
By rightRestaurants, Limited Service
Limited-service, full-service and beverage-service restaurant rows each show P for the block of four cells after NC, with no L18 (drive-through prohibited) or L19 note, so a drive-through is not limited by the use table; LDC Sec. 5.3.13 standards apply (4 stacking spaces for limited service, 3 per window for beverage, 12 ft aisles, screening from streets and homes, canopy over the pick-up window). The four columns cannot be told apart in the extracted text, so this rests on token order plus Gilbert records showing drive-through restaurants handled by site plan/design review rather than a use permit (no restaurant example found for CC specifically). A planned area overlay may add limits.
LDC Sec. 3.1 Table 3.1.2 (Use Regulations), Eating and Drinking Establishments rowsgilbertaz.gov2026-11-16
GBC
Gateway Business Center
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
GC
General Commercial
By rightRestaurants, Limited Service
Limited-service, full-service and beverage-service restaurant rows each show P for the block of four cells after NC, with no L18 (drive-through prohibited) or L19 note, so a drive-through is not limited by the use table; LDC Sec. 5.3.13 standards apply (4 stacking spaces for limited service, 3 per window for beverage, 12 ft aisles, screening from streets and homes, canopy over the pick-up window). The four columns cannot be told apart in the extracted text, so this rests on token order plus Gilbert records showing drive-through restaurants handled by site plan/design review rather than a use permit (Z22-17, 2022, applicant and staff report). A planned area overlay may add limits.
LDC Sec. 3.1 Table 3.1.2 (Use Regulations), Eating and Drinking Establishments rowsgilbertaz.gov2026-11-16
GI
General Industrial
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
GO
General Office
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
GVC
Gateway Village Center
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
HVC
Heritage Village Center District
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
LI
Light Industrial
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
MF/H
Multi Family/High Density
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
MF/L
Multi Family/Low Density
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
MF/M
Multi Family/Medium Density
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
MU/L
Mixed-Use/Large
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
MU/S
Mixed-Use/Small
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
NC
Neighborhood Commercial
By rightIn the NC District, the hours that a business may be open to the public are limited to between 6:00 a.m. and 11:00 p.m.
Restaurant rows (limited, full, beverage service) show P in the NC column with note L35: open to the public only 6:00 a.m. to 11:00 p.m. unless a Conditional Use Permit allows longer hours. No L18 or L19 drive-through limit is attached, and a Gilbert Planning Commission staff report (May 1, 2024, case UP23-47) states a drive-through restaurant is a permitted use in NC and that the 2021 code update removed the old Use Permit requirement for NC drive-throughs. That case needed a Use Permit only because of older design guidelines for a specific planned development (Seville PAD); a planned area overlay can add its own requirement. Drive-through design and stacking standards in LDC Sec. 5.3.13 apply.
LDC Sec. 3.1 Table 3.1.2 (Use Regulations), note L35gilbertaz.gov2026-11-16
NO
Neighborhood Office
Not allowedDrive-through facilities prohibited
L18 ('Drive-through facilities prohibited') sits in the cell right after HVC (L19) and right before GO (L9) in the limited and full-service rows, which fixes it as the NO cell. A restaurant without a drive-through is not ruled out by the table.
LDC Sec. 3.1 Table 3.1.2, note L18gilbertaz.gov2026-11-16
PF/I
Public Facility/Institutional
Not confirmedNot read closely enough to state a rule.gilbertaz.gov2026-11-16
RC
Regional Commercial
By rightRestaurants, Limited Service
Limited-service, full-service and beverage-service restaurant rows each show P for the block of four cells after NC, with no L18 (drive-through prohibited) or L19 note, so a drive-through is not limited by the use table; LDC Sec. 5.3.13 standards apply (4 stacking spaces for limited service, 3 per window for beverage, 12 ft aisles, screening from streets and homes, canopy over the pick-up window). The four columns cannot be told apart in the extracted text, so this rests on token order plus Gilbert records showing drive-through restaurants handled by site plan/design review rather than a use permit (DR22-115 study session, two drive-throughs). A planned area overlay may add limits.
LDC Sec. 3.1 Table 3.1.2 (Use Regulations), Eating and Drinking Establishments rowsgilbertaz.gov2026-11-16
SC
Shopping Center
By rightRestaurants, Limited Service
Limited-service, full-service and beverage-service restaurant rows each show P for the block of four cells after NC, with no L18 (drive-through prohibited) or L19 note, so a drive-through is not limited by the use table; LDC Sec. 5.3.13 standards apply (4 stacking spaces for limited service, 3 per window for beverage, 12 ft aisles, screening from streets and homes, canopy over the pick-up window). The four columns cannot be told apart in the extracted text, so this rests on token order plus Gilbert records showing drive-through restaurants handled by site plan/design review rather than a use permit (Design Review case DR23-86, Dec. 2023). A planned area overlay may add limits.
LDC Sec. 3.1 Table 3.1.2 (Use Regulations), Eating and Drinking Establishments rowsgilbertaz.gov2026-11-16
SF-6
Single Family Residential (6,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-7
Single Family Residential (7,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-8
Single Family Residential (8,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-10
Single Family Residential (10,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-15
Single Family Residential (15,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-35
Single Family Residential (35,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-43
Single Family Residential (43,000 sq.ft. per D.U.)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-A
Single Family Residential (Attached)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16
SF-D
Single Family Residential (Detached)
Not allowedRestaurants, Limited Service
Restaurant rows start with the NC cell (the first token is followed by L35, the NC-only hours note), so the twelve residential columns are blank; the code treats blank and unlisted uses as not permitted (Sec. 1.11 and 3.1.2.C).
LDC Sec. 3.1 Table 3.1.2 (Use Regulations)gilbertaz.gov2026-11-16

"By right" means permitted with site plan and building permit review only. Overlay districts, planned developments (PD/PUD) and conditions attached to a past rezoning can change the answer for a single parcel.

Official zoning map layer

To find the district for a parcel, query the jurisdiction's own GIS zoning layer: https://maps.gilbertaz.gov/arcgis/rest/services/OD/Growth_Development_Maps_1/MapServer/8 (district field: ZCODE)

Public ArcGIS layer 8 'Zoning' (polygon) on the Growth_Development_Maps_1 service; f=json answers without login. Zone code field is ZCODE (coded domain WS1_TOG_ZCODE); Description carries the district name. returnDistinctValues query on ZCODE/Description returned 30 rows: 28 coded values plus one null row and a second SF-43 row with a null description. The OD/GGDTest_11 copy of layer 8 returned 404 and was not used. MU/R (Mixed-Use/Regional) appears in the LDC Table 3.1.2 column list but is not a value on this layer, so it is left out of the districts list. The layer has no PUD/PD values. District list checked against the LDC use-table headers.

Sources

How to confirm before you buy

  1. Look up the parcel on the official zoning map to get its district and any overlay.
  2. Open the code section linked in the table and read the use table and the drive-thru standards.
  3. Call the planning office and ask whether a drive-thru restaurant needs anything beyond site plan review at that address.

Why this library exists

I'm Luke Smith. I find land for drive-thru brands like 7 Brew, Ellianos Coffee and Starbucks, sign the tenant, build the shop and sell it as a net lease property. Every deal starts with the same question: is the use allowed here without a rezoning? Getting that answer takes too long, so we read the codes (with AI research help), and I publish what we find with a link back to every source so you can check it yourself.

If you have a site that fits a drive-thru, or you want to learn how these deals are put together, join the free Reverse Deal Finder community on Skool, see cap rates and land prices by brand, or call 1-760-392-1525. Brokers welcome: I pay commissions.